Vor einigen Monaten habe ich meinen FreeBSD (damals noch 11 heute 12) Desktop an einen Microsoft Windows Routing und RAS VPN Server angebunden. Das eingesetzte VPN war ein IPsec L2TP. Heute schaffe ich es endlich das Thema mal wegzuschreiben. Grob gesehen ist dieses der Aufbau.
Der FreeBSD Desktop hat dabei die IPv4 Adresse 192.168.10.57, der Windows Routing RAS VPN Server hat den FQDN vpnserver.domain.tld mit der IPv4 88.88.88.88 und der IPsec Tunnel hat den Namen vpnname. Die Netze im Unternehmen sind 172.16.0.0/12 und 10.0.0.0/8.
Tunneltyp ist ein IPsec L2TP an dem Windows „Ding“ mit PSK für den IPsec Tunnel und normaler Dämenenanmeldung über L2TP.
Auf meinem FreeBSD Desktop brauche ich also ipsec für den Tunnel und ich nutze mpd5 für L2TP. Ich „glaube“ l2tpd wäre vielleicht etwas besser, da mpd5 etwas manuelle Arbeit benötigt. Da ich an ein paar anderen Stellen ebenfalls mpd5 nutze und hier ohne Windows auch keine Handarbeit mehr nötig ist…. Es geht mir halt leichter von der Hand 🙂 Insg. ist die gesamte Konfiguration aber sehr einfach.
Meine ipsec Konfiguration sie wie folgt aus:
/usr/local/etc/ipsec.conf
# ipsec.conf - strongSwan IPsec configuration file
# basic configuration
#config setup
# strictcrlpolicy=yes
# uniqueids = no
# Add connections here.
# Sample VPN connections
#conn sample-self-signed
# leftsubnet=10.1.0.0/16
# leftcert=selfCert.der
# leftsendcert=never
# right=192.168.0.2
# rightsubnet=10.2.0.0/16
# rightcert=peerCert.der
# auto=start
#conn sample-with-ca-cert
# leftsubnet=10.1.0.0/16
# leftcert=myCert.pem
# right=192.168.0.2
# rightsubnet=10.2.0.0/16
# rightid="C=CH, O=Linux strongSwan CN=peer name"
# auto=start
config setup
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev1
authby=psk
conn vpnname
type=transport
leftfirewall=yes
right=vpnserver.domain.tld
rightid = %any
rightsubnet=0.0.0.0/0
auto=add
left=%defaultroute
leftprotoport=17/%any
rightprotoport=17/1701
ike=3des-sha1-modp1024!
esp=3des-sha1
modeconfig=push
Der PSK steht in der /usr/local/etc/ipsec.secrets
# ipsec.secrets - strongSwan IPsec secrets file vpnserver.domain.tld %any : PSK "abcdefg1234567"
Den IPsec Tunnel baut man nun einfach wie folgt auf:
root@errortest:~ # ipsec up vpnname
initiating Main Mode IKE_SA vpnname[20] to 88.88.88.88
generating ID_PROT request 0 [ SA V V V V V ]
sending packet: from 192.168.10.57[500] to 88.88.88.88[500] (176 bytes)
received packet: from 88.88.88.88[500] to 192.168.10.57[500] (208 bytes)
parsed ID_PROT response 0 [ SA V V V V V V ]
received MS NT5 ISAKMPOAKLEY vendor ID
received NAT-T (RFC 3947) vendor ID
received draft-ietf-ipsec-nat-t-ike-02\n vendor ID
received FRAGMENTATION vendor ID
received unknown vendor ID: fb:1d:e3:cd:f3:41:b7:ea:16:b7:e5:be:08:55:f1:20
received unknown vendor ID: e3:a5:96:6a:76:37:9f:e7:07:22:82:31:e5:ce:86:52
selected proposal: IKE:3DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024
generating ID_PROT request 0 [ KE No NAT-D NAT-D ]
sending packet: from 192.168.10.57[500] to 88.88.88.88[500] (244 bytes)
received packet: from 88.88.88.88[500] to 192.168.10.57[500] (260 bytes)
parsed ID_PROT response 0 [ KE No NAT-D NAT-D ]
local host is behind NAT, sending keep alives
generating ID_PROT request 0 [ ID HASH ]
sending packet: from 192.168.10.57[4500] to 88.88.88.88[4500] (68 bytes)
received packet: from 88.88.88.88[4500] to 192.168.10.57[4500] (68 bytes)
parsed ID_PROT response 0 [ ID HASH ]
IKE_SA vpnname[20] established between 192.168.10.57[192.168.10.57]...88.88.88.88[88.88.88.88]
scheduling reauthentication in 3402s
maximum IKE_SA lifetime 3582s
generating QUICK_MODE request 2082742542 [ HASH SA No ID ID NAT-OA NAT-OA ]
sending packet: from 192.168.10.57[4500] to 88.88.88.88[4500] (220 bytes)
received packet: from 88.88.88.88[4500] to 192.168.10.57[4500] (212 bytes)
parsed QUICK_MODE response 2082742542 [ HASH SA No ID ID NAT-OA NAT-OA ]
selected proposal: ESP:3DES_CBC/HMAC_SHA1_96/NO_EXT_SEQ
CHILD_SA vpnname{38} established with SPIs c387d93f_i 4720cab6_o and TS 192.168.10.57/32[udp] === 88.88.88.88/32[udp/l2f]
connection 'vpnname' established successfully
Ob der IPsec Tunnel steht sieht man mit:
root@errortest:~ # ipsec statusall
Status of IKE charon daemon (strongSwan 5.7.1, FreeBSD 12.0-RELEASE-p3, amd64):
uptime: 12 hours, since Apr 03 21:26:07 2019
worker threads: 11 of 16 idle, 5/0/0/0 working, job queue: 0/0/0/0, scheduled: 5
loaded plugins: charon aes des blowfish rc2 sha2 sha1 md4 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs7 pkcs8 pkcs12 pgp dnskey sshkey pem openssl fips-prf curve25519 xcbc cmac hmac curl attr kernel-pfkey kernel-pfroute resolve socket-default stroke vici updown eap-identity eap-md5 eap-mschapv2 eap-tls eap-ttls eap-peap xauth-generic whitelist addrblock counters
Listening IP addresses:
2003:88:53dd:a800:eef4:bbff:fe47:c54c
fd00::eef4:bbff:fe47:c54c
192.168.10.57
Connections:
vpnname: %any...vpnserver.domain.tld IKEv1
vpnname: local: [192.168.10.57] uses pre-shared key authentication
vpnname: remote: uses pre-shared key authentication
vpnname: child: dynamic[udp] === 0.0.0.0/0[udp/l2f] TRANSPORT
Security Associations (1 up, 0 connecting):
vpnname[20]: ESTABLISHED 14 seconds ago, 192.168.10.57[192.168.10.57]...88.88.88.88[88.88.88.88]
vpnname[20]: IKEv1 SPIs: 8d3cfef7264b42cc_i* 0d322a1593a9db84_r, pre-shared key reauthentication in 56 minutes
vpnname[20]: IKE proposal: 3DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024
vpnname{38}: INSTALLED, TRANSPORT, reqid 10, ESP in UDP SPIs: c387d93f_i 4720cab6_o
vpnname{38}: 3DES_CBC/HMAC_SHA1_96, 0 bytes_i, 0 bytes_o, rekeying in 14 minutes
vpnname{38}: 192.168.10.57/32[udp] === 88.88.88.88/32[udp/l2f]
Jetzt fehlt also nur noch L2TP, meine mpd5 Konfiguration sieht dabei so aus /usr/local/etc/mpd5/mpd.conf :
startup:
# Set web self 127.0.0.1 5008
# Set user vpntest vpntest admin
# Set web open
log +ALL +EVENTS -FRAME -ECHO
default:
load L2TP_client
L2TP_client:
create bundle static B1
set iface up-script /home/kernel/vpnname-up.sh
set iface down-script /home/kernel/vpnname-down.sh
set bundle enable crypt-reqd
set bundle enable compression
set bundle enable ipv6cp
set ccp yes mppc
set mppc no e40 e56
set mppc yes e128 stateless
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
set ipcp enable req-pri-dns
set ipcp enable req-sec-dns
set iface route 172.16.0.0/12
set iface route 10.0.0.0/8
set iface enable tcpmssfix
create link static L1 l2tp
set link action bundle B1
set auth authname "AD-USERNAME"
set auth password "AD-PASSWORD"
set link max-redial 0
set link mtu 1400
set link keep-alive 20 75
set link accept chap-msv2
set link no pap eap
set l2tp peer vpnserver.domain.tld
open
Einfach starten mit:
root@errortest:/ # mpd5 Multi-link PPP daemon for FreeBSD process 10142 started, version 5.8 (root@120amd64-quarterly-job-15 02:54 8-Feb-2019) [B1] Bundle: Interface ng0 created [L1] [L1] Link: OPEN event [L1] LCP: Open event [L1] LCP: state change Initial --> Starting [L1] LCP: LayerStart L2TP: Initiating control connection 0x800caa310 0.0.0.0 0 <-> 88.88.88.88 1701 L2TP: Control connection 0x800caa310 192.168.10.57 38844 <-> 88.88.88.88 1701 connected [L1] L2TP: Incoming call #7540000 via control connection 0x800caa310 initiated [L1] L2TP: Call #7540000 connected [L1] Link: UP event [L1] LCP: Up event [L1] LCP: state change Starting --> Req-Sent [L1] LCP: SendConfigReq #1 [L1] ACFCOMP [L1] PROTOCOMP [L1] MRU 1500 [L1] MAGICNUM 0x2d8654b6 [L1] LCP: SendConfigReq #2 [L1] ACFCOMP [L1] PROTOCOMP [L1] MRU 1500 [L1] MAGICNUM 0x2d8654b6 [L1] LCP: rec'd Configure Request #0 (Req-Sent) [L1] MRU 1400 [L1] AUTHPROTO EAP [L1] MAGICNUM 0x74943399 [L1] PROTOCOMP [L1] ACFCOMP [L1] CALLBACK 6 [L1] MP MRRU 1614 [L1] ENDPOINTDISC [LOCAL] 01 d0 15 a9 b4 71 4f f4 a0 97 8e 3c e4 ef 93 d7 00 00 0 [L1] LCP: SendConfigRej #0 [L1] CALLBACK 6 [L1] MP MRRU 1614 [L1] LCP: rec'd Configure Ack #2 (Req-Sent) [L1] ACFCOMP [L1] PROTOCOMP [L1] MRU 1500 [L1] MAGICNUM 0x2d8654b6 [L1] LCP: state change Req-Sent --> Ack-Rcvd [L1] LCP: rec'd Configure Request #1 (Ack-Rcvd) [L1] MRU 1400 [L1] AUTHPROTO EAP [L1] MAGICNUM 0x74943399 [L1] PROTOCOMP [L1] ACFCOMP [L1] ENDPOINTDISC [LOCAL] 01 d0 15 a9 b4 71 4f f4 a0 97 8e 3c e4 ef 93 d7 00 00 0 [L1] LCP: SendConfigNak #1 [L1] AUTHPROTO CHAP MSOFTv2 [L1] LCP: rec'd Configure Request #2 (Ack-Rcvd) [L1] MRU 1400 [L1] AUTHPROTO CHAP MSOFTv2 [L1] MAGICNUM 0x74943399 [L1] PROTOCOMP [L1] ACFCOMP [L1] ENDPOINTDISC [LOCAL] 01 d0 15 a9 b4 71 4f f4 a0 97 8e 3c e4 ef 93 d7 00 00 0 [L1] LCP: SendConfigAck #2 [L1] MRU 1400 [L1] AUTHPROTO CHAP MSOFTv2 [L1] MAGICNUM 0x74943399 [L1] PROTOCOMP [L1] ACFCOMP [L1] ENDPOINTDISC [LOCAL] 01 d0 15 a9 b4 71 4f f4 a0 97 8e 3c e4 ef 93 d7 00 00 0 [L1] LCP: state change Ack-Rcvd --> Opened [L1] LCP: auth: peer wants CHAP, I want nothing [L1] LCP: LayerUp [L1] CHAP: rec'd CHALLENGE #0 len: 26 [L1] Name: "VPN-SERVER" [L1] CHAP: Using authname "AD-USERNAME" [L1] CHAP: sending RESPONSE #0 len: 60 [L1] CHAP: rec'd SUCCESS #0 len: 46 [L1] MESG: S=39CCB87E756B7996C5A261EEC4CA14D30E4616E0 [L1] LCP: authorization successful [L1] Link: Matched action 'bundle "B1" ""' [L1] Link: Join bundle "B1" [B1] Bundle: Status update: up 1 link, total bandwidth 64000 bps [B1] IPCP: Open event [B1] IPCP: state change Initial --> Starting [B1] IPCP: LayerStart [B1] IPV6CP: Open event [B1] IPV6CP: state change Initial --> Starting [B1] IPV6CP: LayerStart [B1] CCP: Open event [B1] CCP: state change Initial --> Starting [B1] CCP: LayerStart [B1] IPCP: Up event [B1] IPCP: state change Starting --> Req-Sent [B1] IPCP: SendConfigReq #1 [B1] IPADDR 0.0.0.0 [B1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [B1] PRIDNS 0.0.0.0 [B1] SECDNS 0.0.0.0 [B1] IPV6CP: Up event [B1] IPV6CP: state change Starting --> Req-Sent [B1] IPV6CP: SendConfigReq #1 [B1] CCP: Up event [B1] CCP: state change Starting --> Req-Sent [B1] CCP: SendConfigReq #1 [B1] MPPC [B1] 0x01000040:MPPE(128 bits), stateless [B1] IPV6CP: rec'd Configure Request #4 (Req-Sent) [B1] IPV6CP: SendConfigAck #4 [B1] IPV6CP: state change Req-Sent --> Ack-Sent [B1] CCP: rec'd Configure Request #5 (Req-Sent) [B1] MPPC [B1] 0x01000001:MPPC, stateless [B1] CCP: SendConfigNak #5 [B1] MPPC [B1] 0x01000040:MPPE(128 bits), stateless [B1] IPCP: rec'd Configure Request #6 (Req-Sent) [B1] IPADDR 10.16.100.13 [B1] 10.16.100.13 is OK [B1] IPCP: SendConfigAck #6 [B1] IPADDR 10.16.100.13 [B1] IPCP: state change Req-Sent --> Ack-Sent [B1] IPCP: rec'd Configure Reject #1 (Ack-Sent) [B1] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [B1] IPCP: SendConfigReq #2 [B1] IPADDR 0.0.0.0 [B1] PRIDNS 0.0.0.0 [B1] SECDNS 0.0.0.0 [B1] IPV6CP: rec'd Configure Ack #1 (Ack-Sent) [B1] IPV6CP: state change Ack-Sent --> Opened [B1] IPV6CP: LayerUp [B1] eef4:bbff:fe47:c54c -> e467:e46a:5b1f:dfc1 [B1] IFACE: Up event [B1] CCP: rec'd Configure Ack #1 (Req-Sent) [B1] MPPC [B1] 0x01000040:MPPE(128 bits), stateless [B1] CCP: state change Req-Sent --> Ack-Rcvd [B1] CCP: rec'd Configure Request #7 (Ack-Rcvd) [B1] MPPC [B1] 0x01000040:MPPE(128 bits), stateless [B1] CCP: SendConfigAck #7 [B1] MPPC [B1] 0x01000040:MPPE(128 bits), stateless [B1] CCP: state change Ack-Rcvd --> Opened [B1] CCP: LayerUp [B1] CCP: Compress using: mppc (MPPE(128 bits), stateless) [B1] CCP: Decompress using: mppc (MPPE(128 bits), stateless) [B1] IPCP: rec'd Configure Nak #2 (Ack-Sent) [B1] IPADDR 10.16.100.34 [B1] 10.16.100.34 is OK [B1] PRIDNS 10.16.0.53 [B1] SECDNS 10.16.0.52 [B1] IPCP: SendConfigReq #3 [B1] IPADDR 10.16.100.34 [B1] PRIDNS 10.16.0.53 [B1] SECDNS 10.16.0.52 [B1] IPCP: rec'd Configure Ack #3 (Ack-Sent) [B1] IPADDR 10.16.100.34 [B1] PRIDNS 10.16.0.53 [B1] SECDNS 10.16.0.52 [B1] IPCP: state change Ack-Sent --> Opened [B1] IPCP: LayerUp [B1] 10.16.100.34 -> 10.16.100.13
Ob alles steht sieht man ebenfalls mit ifconfig :
ng0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1396 inet6 fe80::eef4:bbff:fe47:c54c%ng0 prefixlen 64 scopeid 0x3 inet 10.16.100.34 --> 10.16.100.13 netmask 0xffffffff nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Damit sollte auch schon der Tunnel stehen.
Der Windows VPN Server übermittelt zwar eigentlich die Routen, DNS Server usw., dieses nimmt der mpd5 aber nicht alles gut an. Das meinte ich mit manueller Handarbeit. Sicher nichts für die Masse aber wenn man als Admin „ran“ möchte sicher kein größeres Problem. set ccp yes mppc activiert hierbei die MPPC Komprimierung und Verschlüsselung. set mppc yes e128 stateless ist dabei für die Zusammenarbeit mit dem Windows Server wichtig, denn e128 / stateless ermöglicht als einzige Option die Zusammenarbeit mit MS-CHAPv2 (was hier zum Einsatz kommt). Per IPCP frage ich zwar die Konfiguration wie die ersten beiden DNS-Server ab ( set ipcp enable req-pri-dns / set ipcp enable req-sec-dns ), aktuell mache ich aber damit nichts. Diese Werte werden automatisch mit an die iface up-scripte/down-scripte übermittelt und könnten dort mitbenutzt werden, da ich nur eine solche Verbindung habe und die DNS Konfiguration kenne, nutze die die up/down-scripte nur um die jeweilige /etc/resolv.conf zu kopieren.
Mit den Routen ist es ähnlich, ich kenne die Routen und kann sie also einfach mitgeben: set iface route 172.16.0.0/12 / set iface route 10.0.0.0/8 diese Liste kann nach Belieben eingepasst werden.
Wie gesagt, alles sehr einfach und überschaubar.
Ich starte IPsec und in folge mpd5 meist von Hand, wenn ich es mal brauche, man kann aber auch alles per Dienst starten lassen oder sich irgendeinen Startknopf bauen.
Fragen? Dann fragen!
Schreibe einen Kommentar